SITEX & SITEXS CONTROL UNITS
The SCU2.0 has a system for direct measurement of the high voltage delivered by the X-Ray generator to guarantee the accuracy of the radiological parameters. Based on this data the control system maintains the stability of mA and kilovolts to within ± 0.5% in any selection range.
SITEX & XS units offer a totally constant quality of exposures, as they are virtually exempt from fluctuations in the power supply. Its broader power range (from 90 V to 264 VAC) voltage selector free means this robust control unit can operate from practically any mains power network worldwide. Alternatively, its 0.99 power factors enable operation from any of the most commonly used light and low power generating sets available on the market.
The user-friendly high strength polyester front panel is equipped with a sensory-type 16-key keypad, a high brightness display, and an anti-reflection screen.
The SCU2.0 also includes a programmable access codes system that features three security levels (supervisor, operator and service engineer) which limit the access to certain functions in relation to the security level selected.
First and foremost, our SCU2.0 control unit is intended to be user-friendly. In order to reduce the number of test shots to a minimum, the operator can use a virtually unlimited source of standard exposures that have been previously pre-defined. In fact, all of the radiological parameters of exposure can be memorized by simply pressing a single key, which means the operator can return to this whenever he or she wants to without having to key them back in again!
|kV, mA and time setting steps||kV, mA, sec||1.0, 0.1, 1.0|
|Exposure time range||min, sec||1 sec to 99 min 59 sec|
|Direct kV and mA measurement (Control accuracy)||%||Yes / +0.5 / -0.5|
|Simultaneus display of measurements and settings||-||Yes|
|Pilot light indicator (Power ON, X-ray ON, Securities)||-||3|
|Independant START and STOP buttons||-||Yes|
|Two position safety key rotary switch||-||X-ray ON / STANDBY|
|Two position main rotary switch||-||Mains ON / OFF|
|High brightness graphic Vacuum Fluorescent Displays (VFD)||-||2 x 20 with anti-reflection screen|
|Preheating is function of selected kVs (kV max by default)||-||Automatic|
|Exposure time calculator (material, FFD, film, density, kV, mA, time)||-||Optional|
|User-defined data enabling exposure time calculation||-||Optional|
|Type of power supply||-||Mains, Power generator|
|Supply voltage range – SELECTOR FREE – Auto resettable fuses||VAC||From 90 to 264|
|Supply frequency range – SELECTOR FREE||Hz||From 45 to 66|
|Minimum Power Factor||%||> 0.7|
|Max RMS mains current (300 kV / 6 mA - SITEX D3006)||A||12 at 220 VAC|
|Storage ambient temperature range||°C||-40 to +80|
|Working ambient temperature range||°C||-25 to +55|
|Dimensions without handle||mm||355 (W) x 157 (H) x 525 (D)|